博客
关于我
redhat6.9安装oracle11.2.0.4 PRCF-2010
阅读量:443 次
发布时间:2019-03-06

本文共 3952 字,大约阅读时间需要 13 分钟。

redhat6.9安装oracle11.2.0.4 执行root.sh脚本,发现scp文件至节点2无法传输报错

INFO: /tmp/OraInstall2020-05-04_11-56-08PM/mvstubs.shINFO: Copying Oracle home '/u01/app/11.2.0/grid' to remote nodes 'wsgw2'.INFO: Copying Oracle home '/u01/app/11.2.0/grid' to remote nodes 'wsgw2'.WARNING: Error while copying directory /u01/app/11.2.0/grid with exclude file list '/tmp/OraInstall2020-05-04_11-56-08PM/installExcludeFile.lst'  to nodes 'wsgw2'. [PRCF-2010 : All connections to the remote nodes got refused. Cannot proceed with the file transfer. There has to be at least one remote node to send the installer files!PRCF-2010 : All connections to the remote nodes got refused. Cannot proceed with the file transfer. There has to be at least one  remote node to send the installer files!]Refer to '/u01/app/oraInventory/logs/installActions2020-05-04_11-56-08PM.log' for details. You may fix the errors on the  required remote nodes. Refer to the install guide for error recovery. Click 'Yes' if you want to proceed. Click 'No'  to exit the install. Do you want to continue?

查询MOS

Linux: GI installation fails as bindv6only is set to 1: "PRCF-2010 : All connections to the remote nodes got refused. Cannot proceed with the file transfer" (Doc ID 1999296.1)    The firewall is disabled and hence not the cause of the connections being refused虽然版本不太匹配,MOS是12.1 但是其中有关于ip6tables!!!root@node1:~$ /etc/init.d/iptables statusiptables: Firewall is not running.root@node1:~$ /etc/init.d/ip6tables statusip6tables: Firewall is not running.root@node2:~$ /etc/init.d/iptables statusiptables: Firewall is not running.root@node2:~$ /etc/init.d/ip6tables statusip6tables: Firewall is not running. SOLUTIONThe issue is caused by the kernel parameter net.ipv6.bindv6only being set to 1 as seen belowgrid@node1:~> sysctl net.ipv6.bindv6onlynet.ipv6.bindv6only = 1grid@node1:~>The solution is to set net.ipv6.bindv6only to 0 and install the Grid Infrastructure softwarenode1:~ # sysctl net.ipv6.bindv6only=0net.ipv6.bindv6only = 0node1:~ #

实际环境检测

系统安装redhat6.9 防火墙已关闭,但是对于ipv6的服务并未关闭!!! 因此是这个问题导致的,关闭ipv6服务后,ok  两个节点都要操作 [root@wsgw1 CVU_11.2.0.4.0_grid]# /etc/init.d/iptables statusiptables: Firewall is not running.[root@wsgw1 CVU_11.2.0.4.0_grid]# sysctl net.ipv6.bindv6only net.ipv6.bindv6only = 0[root@wsgw1 CVU_11.2.0.4.0_grid]# [root@wsgw1 CVU_11.2.0.4.0_grid]# [root@wsgw1 CVU_11.2.0.4.0_grid]#  sysctl -a|grep -i 'ipv6'|grep 'disable'net.ipv6.conf.all.disable_ipv6 = 0net.ipv6.conf.default.disable_ipv6 = 0net.ipv6.conf.eth0.disable_ipv6 = 0net.ipv6.conf.eth1.disable_ipv6 = 0net.ipv6.conf.lo.disable_ipv6 = 0[root@wsgw1 CVU_11.2.0.4.0_grid]# /etc/init.d/ip6tables statusTable: filterChain INPUT (policy ACCEPT)num  target     prot opt source               destination         1    ACCEPT     all      ::/0                 ::/0                state RELATED,ESTABLISHED 2    ACCEPT     icmpv6    ::/0                 ::/0                3    ACCEPT     all      ::/0                 ::/0                4    ACCEPT     udp      ::/0                 fe80::/64           state NEW udp dpt:546 5    ACCEPT     tcp      ::/0                 ::/0                state NEW tcp dpt:22 6    REJECT     all      ::/0                 ::/0                reject-with icmp6-adm-prohibited Chain FORWARD (policy ACCEPT)num  target     prot opt source               destination         1    REJECT     all      ::/0                 ::/0                reject-with icmp6-adm-prohibited Chain OUTPUT (policy ACCEPT)num  target     prot opt source               destination         [root@wsgw1 CVU_11.2.0.4.0_grid]# /etc/init.d/ip6tables stopip6tables: Setting chains to policy ACCEPT: filter         [  OK  ]ip6tables: Flushing firewall rules:                        [  OK  ]ip6tables: Unloading modules:                              [  OK  ][root@wsgw1 CVU_11.2.0.4.0_grid]# chkconfig --level 35 iptables off [root@wsgw2 CVU_11.2.0.4.0_grid]#  /etc/init.d/ip6tables statusip6tables: Firewall is not running.

 

转载地址:http://dtlyz.baihongyu.com/

你可能感兴趣的文章
Mysql学习总结(10)——MySql触发器使用讲解
查看>>
Mysql学习总结(11)——MySql存储过程与函数
查看>>
Mysql学习总结(12)——21分钟Mysql入门教程
查看>>
Mysql学习总结(13)——使用JDBC处理MySQL大数据
查看>>
Mysql学习总结(14)——Mysql主从复制配置
查看>>
Mysql学习总结(15)——Mysql错误码大全
查看>>
Mysql学习总结(16)——Mysql之数据库设计规范
查看>>
Mysql学习总结(17)——MySQL数据库表设计优化
查看>>
Mysql学习总结(18)——Mysql主从架构的复制原理及配置详解
查看>>
Mysql学习总结(19)——Mysql无法创建外键的原因
查看>>
Mysql学习总结(19)——Mysql无法创建外键的原因
查看>>
Mysql学习总结(1)——常用sql语句汇总
查看>>
Mysql学习总结(20)——MySQL数据库优化的最佳实践
查看>>
Mysql学习总结(21)——MySQL数据库常见面试题
查看>>
Mysql学习总结(22)——Mysql数据库中制作千万级测试表
查看>>
Mysql学习总结(23)——MySQL统计函数和分组查询
查看>>
Mysql学习总结(24)——MySQL多表查询合并结果和内连接查询
查看>>
Mysql学习总结(25)——MySQL外连接查询
查看>>
Mysql学习总结(26)——MySQL子查询
查看>>
Mysql学习总结(27)——Mysql数据库字符串函数
查看>>